OSB Facing Structural Insulated Panels
|Terms of Trade:||FOB,CIF|
|Min. Order:||1 Others|
|Delivery Time:||45 Days|
|Place of Origin:||Dalian China|
Model No.: OSIP
SIPs are high performance thermal efficient composite panels which consist of a sandwich of two layers of structural board with an insulating layer of foam in between for walls, roofs and floors in new residential and commercial buildings.
B. Design theory:
product_1Structural Insulated Panels (SIPs) have become a widely used alternative construction material for homes and other buildings. While many types of Composite Panel building systems have been developed, SIPs now usually refers to panels made from a thick layer of foam (polystyrene or polyurethane) sandwiched between two layers of Oriented Strand Board (osb), Plywood or fiber-cement. The result is an engineered panel that provides structural framing, insulation, and exterior sheathing in a solid, one-piece component.
The basic design concept for SIPs is elegant in its simplicity, and offers several advantages for constructing walls and roofs. Bonding the foam core to the stiff outer skins creates a web-and-flange structural strength (along the same principal as an I-beam) across the length and breadth of the panel. With the capacity to handle axial, bending, racking, and shear loads, properly designed and assembled SIPs not only replace conventional framing, but will withstand high wind, and seismic forces.
C. Advantages to use EPS Foam Sandwish Panels:
High quality construction method.
Comfortably warm, clean, and quiet.
Equal or lower first costs.
Lower long term operating costs.
Incentives available from utility service provider for energy efficient design.
Lower maintenance costs for you.
Construction Process Benefits
Easy to construct, with short learning curve.
60% shorter construction time
Quick turnaround time for greater satisfaction.
Increased builders production capacity.
50% less framing lumber.
50% more energy efficient.
Requires less room at building site (less site disturbance).
Less construction waste.
SIPs are prefabricated systems used primarily for walls and roofs. SIPs employ composite materials, reduce waste through modular construction methods, achieve high insulation
E. OSB Facing Structural Insulated Panels Specification:
Facing: 7/16`` (11.1mm) Canadian OSB (for both side), Exposure 1, APA certified;
Core: 1.2 lb/c.f (20kg/ m3) EPS, fire retardant.
Glue: Certified Structural Adhesive from U.S.A.
Other facing such as fiber cement board, gypsum board can also be the facing, Call for quotation.
No charge for standard edge routs specified with order. Standard routs are flush, 3/4", 1 1/2" or 3". OSB spline routs available for $2.00 per panel as specified.
Electrical chases available for $2.00 each per panel. Chases must be specified prior to lamination.
All panels can be precut to greatly save the onsite labor cost for USD 0.9/sf. (pls note the footage is based on the raw material will be used)
F. Thermal Performance of the Quacent SIP System:
The Quacent SIP s System provides wall and roof assemblies with higher overall (effective) thermal resistance (R-value) than other conventional construction methods. The overall R-value of a building assembly includes the effect of thermal bridges as a result of framing members and is a measure of its ability to resist heat flow through it. The higher the overall R-value of a building assembly, the lower the long-term energy costs will be for heating and cooling.
The table below provides typical R-Values of OSB Board Structural Insulated Panels in different thickness:
leakage rate for a building (quantified in terms of air changes per hour) is often used to determine the energy efficiency of building construction. Air leakage rates vary widely for different types of house construction with values of 0.2 acph or lower achievable for energy efficient house construction using the Quacent SIP System.
The combined high overall R-Value and low air leakage characteristic of buildings built with the Quacent SIP System results in significantly lower energy costs versus other construction methods such as wood frame construction.
Dalian Quacent New Building Materials Co.,Ltd.
Dalian Quacent is a Canadian invested plant & specializing in prefab house for residential and commercial construction. We adopt the latest technology such as Structural Insulated Panels (SIPs), Light Gauge Steel (LGS), Timber Frame (2x4) etc., to make durable, and energy efficient, sustainable, and cost effective houses with highest possible prefabricated rate. SIPs, the latest approach in the housing industry & our main building system, can create a strong, durable and energy efficient building envelope in a very short time. A well-built SIPs homes can reduce annual energy cost by 50 percent or more which greatly cut down on carbon dioxide emissions. Prefabricated SIPs also save builders a significant amount of onsite labor and generate 0 waste. We have set up the first manufacturing line for SIPs in China & lead the SIPs industry. Our full automatic Light Gauge Steel equipment also enables us to provide LGS house. By our strong R&D, strict QC and full technical support, our houses have been set up in many countries such as Canada, Germany, Netherland, Sweden, Russia, Australia, Japan, etc. Quacent prefab houses have gained reputation world-widely. Our goal is to build the house greener, faster, stronger, more comfortable, and more energy saving.
- Company Name: Dalian Quacent New Building Materials Co.,Ltd.
- Representative: Quanyi Sun
- Product/Service: Prefab Homes , Prefabricated Homes , Structural Insulated Panels , Light Gauge Steel , Prefab Houses , Aluminum Windows
- Capital (Million US $): US$ 1.5 Million
- Year Established: 2007
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 61% - 70%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: Fewer than 5 People
- OEM Services Provided: no
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: No. 10 Quanna Street, Free Trade Zone, Dalian, Liaoning, China
- Contact Person: Mr. Lei Song
- Tel: 86-411-87187755
Premium Related Products