Oak Wood Veneer Waterproof Material SPC Flooring
Basic Info
Model No.: MJOV-SPC-001
Product Description
Oak Wood veneer Waterproof Material SPC Flooring
Product Description
Jiamei oak veneer SPC flooring provides users with sensory enjoyment of the solid wood flooring at the same time,very good solved solid wood flooring is no waterproof, no wear-resistant, easy to cause deformation, mildew, rot and other problems.
Jiamei oak veneer SPC flooring is the revolutionary progress of the flooring materials, it became the most suitable flooring material for the house.It integrates the advantage of wood flooring and ceramic tile at a suit -- warmth, comfortable, waterproof, wear-resistant, Long life, easy to install. It can not only bepaved in the bedroom, living room and other traditional wood flooring area, but also can be paved in the kitchen, balcony, bathroom, outdoor and other traditional wood flooringcan not be paved area, is a new profile flooring can be paved in the whole house.
Jiamei oak veneer SPC flooring has been used environmental protection formula, free of heavy metal, phthalate and other harmful substances, and conform to EN14372、EN649-2011、IEC62321、GB4085-83 standards.
Application Area
Spc Flooring is a revolutionary progress of floor materials, which has become the most suitable floor materials for residential use. Jiamei SPC floor integrates the advantages of wood floor and ceramic tile - warmth, comfort, waterproof, wear-resistant, long life and easy installation. It can be laid in the areas where traditional wood floor is laid, such as bedrooms, living rooms, etc., and in the areas where traditional wood floor cannot be paved, such as kitchens, balconies, washrooms. It is a new type of Wood Spc Flooring that can be paved in the whole house.
Manufacturing Structure
Main quality data of Jiamei SPC high-end floor
≤400mm Scope≤0.25mm ≥400mm Scope≤0.35mm
NO. Items Standards 1
thickness tolerance
0.05mm 2 density
1.9~2.1g/cm³ 3 Shrinkage rate
≤0.1%（80℃ 6H）
4 warping
≤0.5mm/m
5 Perpendicularity straightness
6 Non-slip index
≥0.30mm
7 Lock clearance
≤0.10mm
8 Lock pull force
Normal temperature 23℃
5mm＞13-15kgs/5cm
4.2mm＞12kgs/5cm
＞15-18kgs/5cm
（V-lock for short side）
9 Light fastness
≥6
10 Thermal conductivity
0.25W/(m·℃)
11 Stripping force
≥50N/cm²
Product Performance
First: Common Quality
Scratch resistance: scratch with the end face of the coin, leaving no trace.
Stain resistance: marker pen is easy to wipe without mark
Burn resistant: ignite a cigarette and place it for 3 minutes. There is no trace on the surface.
On the basis of the first one, a kind of reinforced wear-resistant floor is introduced, which can bear the rolling and scalding of cigarettes, and has stronger wear-resistant force for the sand of sole and floor scraping.
Third: Antibacterial Quality
In the case of all kinds of properties, the antibacterial coating is added. It can inhibit E. coli, Staphylococcus aureus and other common bacteria, and effectively isolate the growth of bacteria. It is suitable for kindergartens, nursing homes, schools, families and other public occasions. Installation Method
1. Put the convex of plate B tilt into the groove of plate A, lock and lay flat;
2. After leveling, the spacing between plate B and plate C is about 2-3mm, forming a parallel line;
3. Lift up the plates A and B at the same time (with the ground at a 45 degree angle;
4. Push plate B towards plate C until it is tight;
5. Flatten plate A and plate B with the palm of hands. But do not press too hard against the floor;
6. After assembly, the floor will be flat and seamless. If the floor is uneven or has gaps, gently lift at a 10-30 degree angle and lock it. After locking, the floor will be automatically leveled.
Product Concept
Dalian Jiamei New Materials Co., Ltd. is a high-tech enterprise mainly engaged in research and development, production and sales of wood / stone plastic materials and products. The company has synchronous production technology with international level, good product development ability, mature business concept, good cooperation reputation, advanced management and technical services.
The company always adheres to the business philosophy of "people-oriented, moral first, to create a healthy living environment", takes "building a beautiful, green and harmonious living environment" as the unified vision and mission, practices the development concept of "innovation, coordination, green, opening and sharing" put forward by the state, creates a beautiful space of "pollution-free", and returns a healthy living environment for human beings.
Product Categories : Wood Veneer SPC Flooring > Oak Veneer SPC Flooring